Elemko St/tZn Conductor Connection Clamp 620183371
Application
Clamp, for connecting tape conductors. Used in air termination system, downconductor system, earthing system.
Classification
•Heavy duty (H – 100 kA) (1)
•General use (1)
•Intended to withstand a static mechanical load(1)
•Non-permanent connection (1)
•Short circuit withstand capability12,5 kA rms for 1s(1)As per IEC EN 62561
Technical characteristics
Material Hot dip galvanized steel (St/tZn)
DescriptionIs consisted of two external plates with dimensions 50x50mm and one intermediate plate.
Bolts / nutsM6x25 mm, V2A stainless steel carriage boltsM6 V2A stainless steel nuts
Installation instructions
Tape's dimensionsUp to 30 mm width and 5 mm thickness
Connection arrangements Cross (B1)Parallel (B2)
Installation Above ground, buried in ground, embedded in concrete
Can be connected above ground withAl, SSt (Stainless Steel), St/tZn
Can be connected buried in ground withSSt (Stainless Steel), St/tZn
Can be connected in concrete withCu, Cu/eSn, SSt (Stainless Steel), St/tZn
Tightening torque9 Nm
Testing
The component has successfully passed the testing requirements of standard IEC ΕΝ 62561-1 “Lightningprotection system components (LPSC) – Part 1 : Requirements for connection components”.Test report No 30762 by accredited laboratory as per ISO 17025
The component has successfully passed short circuit withstand capability tests.Test report No 153/2018/EMI
FOR STRIP CONNECTIONS | 25-30/5(mm) |
DIMENSIONS | 25-30x5 |
TYPE | H-100kA |